DNP WCM Plus handleiding

26 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 26
Page 9 of 25
Network Settings
Hotspot Settings allow you to connect your device directly to the WCM-
Plus. Both the hotspot SSID and password are case sensitive. The default
settings are:
SSID: WCM-Plus-xxx (xxx is a unique identifier for the WCM-Plus)
Password: dnp12345
Both the SSID and Password can be changed. Once you change either the
SSID or password, tap Set to save your settings. If you forget your SSID and
Password you can access the WCM-Plus using the QR code on the test print.
Print QR code is a convenient way to provide access to guests or
employees.
Wi-Fi Connection allow a connection to a local Wi-Fi network for internet access while your
device is connected to the WCM-Plus. It also makes IPP (AirPrint®) possible for all devices
connected to the same network.
The pull-down under Wi-Fi will display the available local networks. Select the desired
network, enter the password for that network, and tap Join. Once the connection has been
established the IP address will be displayed for the Wi-Fi network.
Note: Wi-Fi networks that require an agreement page cannot be used with the WCM-Plus
Ethernet Connection - If an Ethernet cable is plugged into the WCM-Plus the IP address will be
displayed in the Ethernet Connection pull-down. An Ethernet connection will often increase
processing speeds and can eliminate interference on Wi-Fi channels.
Devices will be able to see available printers if the Ethernet connection is on the same
network as the Wi-Fi network the devices are connected to.
Note: The system may take a few seconds to detect network connection. This allows the WCM-Plus to
determine if the Ethernet connection is being used for networking or printing.

Bekijk gratis de handleiding van DNP WCM Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDNP
ModelWCM Plus
CategoriePrinter
TaalNederlands
Grootte5893 MB