DJI O4 Air Unit Pro handleiding
Handleiding
Je bekijkt pagina 9 van 23
◆
DO NOT install the air unit in an enclosed area.
• Recommended installation practices for the antennas:
◆
The antenna should maintain a distance of at least 5 cm from the video
transmission module, camera module, metal structural parts, and carbon ber
structural parts. It is recommended to position the two antennas of the DJI O4 Air
Unit Pro at a 90-degree angle for optimal performance.
◆
Make sure that the antenna extends out of the aircraft frame and is not
obstructed by any structural parts. After installation, conrm that the antenna
is clearly visible from both the front and rear of the aircraft.
The metal shell of the air unit will become hot after being powered on so it should
not be installed in a position that is easily accessible or held by hand.
2.3 Installation and Connection
• Operate with caution. Be careful not to scratch any components on the surface
of the circuit board to avoid damaging the product.
• DO NOT overtighten the screws to avoid stripping.
1. Make sure to follow the wiring sequence instructions when connecting the 3-in-1
cable to your ight controller properly. If using soldering, prepare a soldering iron and
solder by yourself. Ensure the solder joints are rm and there are no short circuits or
open circuits.
DJI O4 Air Unit User Manual
© 2025 DJI All Rights Reserved. 9
Bekijk gratis de handleiding van DJI O4 Air Unit Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DJI |
| Model | O4 Air Unit Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1631 MB |
