DJI O4 Air Unit Pro handleiding
Handleiding
Je bekijkt pagina 8 van 23
2 Installation
2.1 Important Notice
• DO NOT apply pressure to or bend the base of the coaxial cable. Improper
operation will result in image interruption or quality degradation.
• The standby time from cold start for the DJI O4 Air Unit Pro and DJI O4 Air Unit is
20 minutes and 2.5 minutes respectively. *
* Measured under idle conditions in an open environment at 25°C (77°F), for reference only.
Restricted by its cooling condition, extra ventilation and heat dissipation measures are
necessary when installing the air unit. Installation way may aect the heat dissipation.
The video transmission module can apply dierent temperature control strategies
according to the standby and ight states.
• Ground temperature control strategy: In the standby state, the protection
system will be activated to automatically shut down the air unit after
overheating. When used with the DJI FPV Remote Controller 2, the goggles will
prompt an overheating alert and restrict takeo if the RF module exceeds a
certain temperature.
• In-Flight temperature control strategy: There will be a prompt alert after
overheating and the video recording will end. If the aircraft continues to
overheat, the video transmission quality will be reduced to improve heat
dissipation.
2.2 Installation Guidelines
• DO NOT expose the video transmission module and camera module during usage to
avoid accidental contact and potential burns. Make sure to install the air unit inside
the aircraft body and in a well-ventilated location (such as near the air intake or
exhaust) to prevent overheating, which may cause video transmission interruption.
• Recommended installation practices that are eective for ventilation and heat
dissipation:
◆
Mount the air unit in a position close to the propellers (distance between the
air unit module and the propellers within 1 cm) so that the downwash can be
eectively utilized.
◆
Use a heat conductive material to connect the frame and the air unit module.
This will dissipate heat to the carbon plate and the other non-conductive metal
components of the frame, thereby extending the operating time.
DJI O4 Air Unit User Manual
8 © 2025 DJI All Rights Reserved.
Bekijk gratis de handleiding van DJI O4 Air Unit Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DJI |
| Model | O4 Air Unit Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1631 MB |
