DJI O4 Air Unit Pro handleiding
Handleiding
Je bekijkt pagina 11 van 23
O4 AIR UNIT
PRO
1
This way up when installing
安装时此面朝上
2
DJI O4 Air Unit
• It is recommended to install M2 ight controller damping balls on the screw
holes of the video transmission module.
• If using a 1S battery as the power supply, try to minimize the voltage drop.
For example, use short cables to ensure the voltage of the video transmission
module port is greater than 3.7 V.
• If using BEC power supply, ensure that the BEC output power is at least 10 W
(e.g., 5 V/2 A).
DJI O4 Air Unit Pro
• If using adhesive to install the video transmission module, it can only be applied
on the side without heat dissipation ns.
• If using BEC power supply, ensure that the BEC output power is at least 13.5 W
(e.g., 9 V/1.5 A).
DJI O4 Air Unit User Manual
© 2025 DJI All Rights Reserved. 11
Bekijk gratis de handleiding van DJI O4 Air Unit Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DJI |
| Model | O4 Air Unit Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1631 MB |
