Dito Sama 602314 handleiding
Handleiding
Je bekijkt pagina 9 van 22
9
ATTENTION!
Do not push or pull the appliance to move it, as it may tip over.
2.6. PLACING THE LOAD
Before placing the load, make sure the way is free and that the oor is at and can take the load. Re-
move the appliance from the wooden pallet, move it to one side, then slide it onto the oor.
2.7. STORAGE
The machine and/or its parts must be stored and protected against damp, in a non-aggressive place
free of vibrations and with room temperature between -10°C and 50°C. The place where the machine
is stored must have a at support surface in order to avoid any twisting of the machine or damage to
the support feet.
ATTENTION!
Machine positioning, installation and disassembly must be carried out by a specialised
technician.
ATTENTION!
Do not make modications to the parts supplied with the machine. Any missing or
faulty parts must be replaced with original parts.
Warnings
• Do not store or use gasoline or other ammable vapours, liquids or items in the vicinity of this or any
other appliance.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Never check for leaks with an open ame.
• The appliance is not suitable for a marine environment.
3. INSTALLATION AND ASSEMBLY
To ensure correct operation of the appliance and maintain safe conditions during use, carefully follow
the instructions given below in this section. Use the machine in adequately lit premises (See appli-
cable technical standard for the country of use. In Europe, refer to standard EN 12464-1).
ATTENTION!
The operations described below must be carried out in compliance with the current
safety regulations, regarding the equipment used and the operating procedures.
ATTENTION!
Before moving the appliance make sure the capacity of the lifting equipment used is
suitable for its weight.
3.1. CUSTOMER’S RESPONSIBILITIES
The Customer must:
-
prearrange a high-sensitivity manual-reset dierential thermal-magnetic switch. For information
regarding the electrical connection, refer to par. 4.2 “Electrical connection”;
- check the atness of the surface on which the machine is placed.
- prearrange a device lockable in the open position for the connection to the power supply.
- prearrange the connection to a suitable earthing system (par. 4.2.3).
3.2. MACHINE SPACE LIMITS
A suitable space must be left around the machine (for operations, maintenance, etc.). This space must
be increased in case of use and/or transfer of other equipment and/or means or if exit routes are ne-
cessary inside the workplace.
Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602314 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2601 MB |