Dito Sama 602314 handleiding
Handleiding
Je bekijkt pagina 10 van 22
10
3.3. POSITIONING
Handle the equipment with care in order to avoid damage or danger to people. Use a pallet for hand-
ling and positioning.
The installation diagram provided in this instruction manual gives the appliance dimensions and the
position of connections (electricity, water). Check that they are available and ready for making all the
necessary connections.
Check and if necessary level the appliance after positioning. Incorrect levelling can cause appliance
malfunctioning.
Arranging the machine:
• position the machine in the required place; the machine must be placed on the oor.
• adjust the height and levelling with the adjustment feet, also checking correct door closing
• wear protective gloves and unpack the machine, carrying out the following operations:
- cut the straps and remove the protective lm, taking care not to scratch the surface if scissors or
blades are used;
For appliances with stainless steel cabinet, remove the protective lm very slowly without tearing it, to
avoid leaving glue stuck to the surface. Should this happen, remove the traces of glue with a non-cor-
rosive solvent, rinsing it o and drying thoroughly; it is advisable to go over all the stainless steel
surfaces with a rag soaked in paran oil in order to create a protective lm.
3.4. DISPOSAL OF PACKING
The packing must be disposed of in compliance with the current regulations in the country where the
appliance is used. All the packing materials are environmentally friendly. They can be safely kept,
recycled or burnt in an appropriate waste incineration plant. Recyclable plastic parts are marked as
follows:
PE
polyethylene: outer wrapping, instruction booklet bag
PP
polypropylene: straps
PS
polystyrene foam: corner protectors
The parts in wood and cardboard can be disposed of, respecting the current regulations in the country
where the machine is used.
4. CONNECTIONS
Refer to the appliance dataplate for the product code.
See the installation diagrams for the position of connections on the appliance:
- ELECTRICITY
- WATER SUPPLY
- WATER DRAIN
4.1. BEFORE CONNECTING
• Clean the pipes to remove any dust, dirt or foreign matter which could block the supply.
• Do not use connection pipes of smaller diameter than that for which the appliance is arranged.
• A rapid shut-o cock must be installed ahead of every appliance in an easily accessible place.
PS
PP
PE
Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602314 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2601 MB |