Dito Sama 602314 handleiding

Handleiding

12345678910111213141516171819202122/ 22

Afdrukken

Je bekijkt pagina 20 van 22

20

Extraordinary maintenance must be carried out by specialised personnel, who can ask the manufactu-

rer to supply a servicing manual.

There must be free air circulation above the appliance. There must be no obstructions caused by

trays, cardboard boxes, jars or other materials; otherwise they must be immediately removed.

3.9.1. MAINTENANCE INTERVALS

The inspection and maintenance intervals depend on the actual machine operation conditions and

ambient conditions (presence of dust, damp, etc.), therefore precise time intervals cannot be given.

In any case, to minimise interruptions of the service, careful and periodical machine maintenance is

advisable.

3.9.2. MAINTENANCE FREQUENCY

In order to guarantee constant machine e󰀩ciency, it is advisable to carry out the checks with the fre-

quency given in the following table:

MAINTENANCE,INSPECTIONS, CHECKS AND CLEANING PÉRIODICITÉ

Routine cleaning General cleaning of machine and surrounding area.

Daily

Cleaning internal parts

Check condition, and for any deformation, loosening or removed parts.

every six months

Control

Check mechanical part, for any breakage or deformation, tightening of

screws. Check readability and condition of words, stickers and symbols and

restore if necessary.

Yearly

Machine structure

Tightening of main bolts (screws, xing systems, etc.) of machine.

Yearly

Safety signs

Check readability and condition of safety signs.

Yearly

Electrical connection cable and plug

Check the connection cable (replace it if necessary).

Yearly

Extraordinary machine maintenance

Check all gas components.

Yearly

(*) The machine is designed and built for a duration of about 10 years. After this period of time (from

machine commissioning) the machine must undergo a general overhaul. Some examples of checks to

be carried out are given below.

- check for any oxidised electrical components or parts; if necessary, replace them and restore the

initial conditions;

- check the structure and welded joints in particular;

- check and replace bolts and/or screws, also checking for any loose components;

- check the electrical and electronic system;

- check the functionality of safety devices;

- check the general condition of protection devices and guards.

ATTENTION!

Machine maintenance, checking and overhaul operations must only be carried out by a

specialised Technician or the After-Sales Service, provided with suitable personal pro-

tection equipment (safety shoes and gloves), tools and ancillary means.

ATTENTION!

Work on the electrical equipment must only be carried out by a specialised electrician

or the After-Sales Service.

12345678910111213141516171819202122/ 22

Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Wasmachine