Dito Sama 602314 handleiding
Handleiding
Je bekijkt pagina 21 van 22
21
3.9.3. DISASSEMBLY
If the appliance has to be disassembled and then reassembled, make sure the various parts are as-
sembled in the correct order (if necessary mark them during disassembly).
Before disassembling the machine, make sure to carefully check its physical condition, and in particu-
lar any parts of the structure that can give or break. Before starting disassembly:
- remove all the pieces (if present) in the machine;
- disconnect the power supply;
- enclose the work area;
-
display a sign indicating that the machine is undergoing maintenance and not to carry out manoeuvres;
- carry out the disassembly operations.
ATTENTION!
All scrapping operations must occur with the machine stopped and cold and all the
energy sources (water, gas electricity) disconnected.
ATTENTION!
To carry out these operations, appropriate PPE must be used.
ATTENTION!
During disassembly and handling of the various parts, the minimum height from the
oor must be maintained.
3.9.4. DECOMMISSIONING
If the machine cannot be repaired, carry out the decommissioning operations, signalling the failure
with a suitable sign, and request assistance of the manufacturer’s after-sales service.
4. MACHINE DISPOSAL
ATTENTION!
DISMANTLING OPERATIONS MUST BE CARRIED OUT BY QUALIFIED PERSONNEL.
ATTENTION!
WORK ON THE ELECTRICAL EQUIPMENT MUST ONLY BE CARRIED OUT BY A QUALI-
FIED ELECTRICIAN, WITH THE POWER SUPPLY DISCONNECTED.
4.1. WASTE STORAGE
At the end of the product’s life-cycle, make sure it is not dispersed in the environment.
Special waste materials can be stored temporarily while awaiting treatment for disposal and/or per-
manent storage. In any case, the current environmental protection laws in the country of use must be
observed.
4.2. PROCEDURE REGARDING APPLIANCE DISMANTLING MACRO OPERATIONS
Before disposing of the machine, make sure to carefully check its physical condition, and in particular
any parts of the structure that can give or break during scrapping.
The machine’s parts must be disposed of in a dierentiated way, according to their dierent characte-
ristics (e.g. metals, oils, greases, plastic, rubber, etc.). Dierent laws are in force in the various coun-
tries, therefore comply with the provisions of the laws and competent bodies in the countries where
scrapping takes place. In general, the appliance must be taken to a specialised collection/scrapping
centre. Dismantle the appliance, grouping the components according to their chemical characteristics,
remembering that the compressor contains lubricant oil and refrigerant uid which can be recycled,
and that the refrigerator components are special waste assimilable with urban waste.
Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602314 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2601 MB |