Dito Sama 602314 handleiding
Handleiding
Je bekijkt pagina 19 van 22
19
ATTENTION!
Respect the requirements for the various routine and extraordinary maintenance
operations.
Non-compliance with the instructions can create risks for personnel.
3.5. EXTERNAL PARTS
SATIN-FINISH STEEL SURFACES (daily)
• Clean all steel surfaces: dirt is easily removed when it has just formed.
• Remove grime, fat and other cooking residuals from steel surfaces when cool using soapy water,
with or without detergent, and a cloth or sponge. Dry the surfaces thoroughly after cleaning.
•
In case of encrusted grime, fat or food residuals, go over with a cloth or sponge, wiping in the
direction of the satin nish and rinsing often: rubbing in a circular motion combined with the particles
of dirt on the cloth/sponge could spoil the steel’s satin nish.
• Metal objects can spoil or damage the steel: damaged surfaces become dirty more easily and are
more subject to corrosion.
• Restore the satin nish if necessary.
3.6. SCALE
STEEL SURFACES (when necessary)
Remove any scale (stains or marks) left by hard water on steel surfaces using suitable natural (e.g.:
vinegar) or chemical (e.g.: “STRIPAWAY” produced by ECOLAB detergents).
3.7. OTHER SURFACES
Clean the appliance tanks or containers using boiled water, adding soda (degreasing) if necessary.
Use the accessories (optional or supplied) specied in the list to eliminate encrustations or food depo-
sits.
IMPORTANT – With electrical equipment, make sure no water comes into contact with electrical
components: water entering can cause short circuiting and dissipation, tripping the protection devices.
3.8. INTERNAL PARTS (every 6 months)
IMPORTANT! Operations to be carried out only by specialised technicians.
• Check the internal parts.
• Remove any deposits of grime inside the appliance.
• Check and clean the drain system.
• Remove any bits of vegetables left in the drum or tank.
• Do not use aggressive detergents to clean the appliance. In particular, do not use chlorine-based
products to clean the appliance or the oor under it, as substances able to damage its components
could form.
• At the end of washing, carry out thorough rinsing by activating the appliance and allowing water to
ow in order to remove any traces of detergents from the pipes inside it.
• Perform a "sterilization" of the equipment using non-chlorine-based products (such as, for example,
"quaternary ammonium salts" sold, for instance, by ECOLAB) after periods of inactivity or when trea-
ting vegetables with signicant amounts of chemicals, following the instructions provided by the pro-
duct supplier. Rinse immediately. This procedure should be performed regularly, approximately once a
week, as a guideline.
NB! In particular ambient conditions (e.g.: intensive use of the appliance, salty environment, etc.) the
above cleaning should be more frequent.
3.9. EXTRAORDINARY MAINTENANCE.
ATTENTION!
USE SUITABLE PERSONAL PROTECTION EQUIPMENT WHEN CARRYING OUT ANY
EXTRAORDINARY MAINTENANCE OPERATION.
Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602314 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2601 MB |