Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 16 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 10
DWL-5x000XY DATA SHEET
3.1.4. Connection using serial converter (RS232)
3.1.4.1. Materials for the Conguration
• 1 × DWL5000XY, DWL5500XY, or DWL5800XY tilt sensor module secured with sensor
cord
• 1 × 12V DC Power Source
• 1 × Digi-Pas DWL5x00XYcontrol box
• 1 × RS232 converter. In this example we are EasySync Converter (Model number:
ES-U-3001-M) is used.
3.1.4.2. Conguration Setup Procedure
1. Secure the sensor cord with tilt sensor module as stated in 2.1 Securing Tilt Sensor Module
with Sensor Cord.
2. Connect the sensor cord to the sensor input on the Digi-Pas DWL5x00XYcontrol box.
3. Source in regulated 12V DC to the power supply input for Control Box.
4. The Power LED (PWR) of the control box lights in orange color. Once the initialization be-
tween the sensor module and the control box is completed, the Power LED turns yellow.
The Sensor LED (SEN 1, SEN 2, SEN 3, SEN 4) on the respective sensor lights up in green
color. If the connection between the tilt sensor module and control box is lost, the Power
LED lights up in red.
5. Select the Serial output Switch on the control box (refer to Figure 15) to RS232.
Figure 15. Changing control box output to support RS232 connection
6. Connect the cable from RS232 serial output on the control box to ES-U-3001-M converter
as in Figure 15.
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
