Digi-Pas DWL-1300XY handleiding
Handleiding
Je bekijkt pagina 9 van 11
Digi-Pas
®
© 2022 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
DWL-1300XY & DWL-1500XY Instruction Manual
6
3. QUESTION AND ANSWER
1. Why device display value is not zero when placing on a at surface?
This situation happens when a precision level is placed on a rough, dirty or uneven sur-
face. Precision digital levels are very sensitive to surface unevenness where it is placed.
Ensure that contact surfaces are clean and smooth to get consistent readings.
Digi-Pas
®
precision digital level has a smart built-in feature that allows users to perform
self-calibration to completely remove any residue offset value and set the device to
its factory accuracy. See video links in www.youtube.com/watch?v=3Me8C0YhnAs on
how to perform “User-Self Calibration”. An alternative to perform self-calibration steps,
users may choose an easy ‘quick solution’ to simply perform the Absolute Level Setting
on the surface of the object to be measured to remove any residual offset on each
measurement to be taken.
2. Why do I get two different readings when placing the device on front facing, and then
replacing it on the reversed facing?
Your precision digital level may have been subjected to extreme physical or tem-
perature shocks during usage, transportation or storage that affected its accuracy.
An offset value of reading may have been present in the device. Digi-Pas
®
precision
digital level has a smart built-in feature that allows users to perform self-calibration to
completely remove any residue offset in the device and set the device to its factory
accuracy. See video links in www.youtube.com/watch?v=3Me8C0YhnAs how to per-
form “User-Self Calibration”. An alternative to perform self-calibration steps, users may
choose an easy ‘quick solution’ to simply perform the Absolute Level Setting on the
surface of the object to be measured to remove any residual off-set on each measure-
ment to be taken.
3. Digipas Smart Levels App unable to pair with a device. What should I do?
Device battery level might be low, please replace 2 new batteries.
4. Digipas Smart Levels App is unable to nd device. What should I do?
Please ensure device Bluetooth is enabled to establish wireless connection. To enable/
disable Bluetooth connection, press and hold device’s MODE button.
Bekijk gratis de handleiding van Digi-Pas DWL-1300XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL-1300XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1657 MB |
