Deye SUN-30K-SG01HP3-AU-BM3 handleiding
Handleiding
Je bekijkt pagina 46 van 61
- 44 -
Grid Setting/LVRT
L/HVRT
HV3
0%
HV3_T
30.24s
HV2
0%
HV2_T
0.04s
HV1
0%
HV1_T
22.11s
LV1
0%
LV1_T
22.02s
LV2
0%
LV2_T
0.04s
Grid
Set7
Reserved: This function is reserved.It is not
recommended.
Grid Setting/V(W) V(Q)
V(W) V(Q)
V1
108.0%
P2
V2
110.0%
P3
P4
V3
112.0%
V4
114.0%
P1
100%
80%
60%
40%
Lock-in/Pn Lock-out/Pn
V1
94.0%
Q2
V2
97.0%
Q3
Q4
V3
105.0%
V4
108.0%
Q1
44%
0%
0%
-44%
Grid
Set5
5%
20%
Grid Setting/P(Q) P(F)
P(Q) P(PF)
P1
0%
Q2
P2
2%
Q3
Q4
P3
0%
P4
22%
Q1
2%
0%
21%
25%
P1
0%
PF2P2
0%
PF3
PF4
P3
0%
P4
62%
PF1
-0.000
-0.000
0.000
0.264
Grid
Set6
Lock-in/Pn Lock-out/Pn
50%
50%
V(W): It is used to adjust the inverter's active power
according to the set grid voltage.
V(Q): It is used to adjust the inverter's reactive power
according to the set grid voltage.
These two functions are used to adjust inverter's output
power (active power and reactive power) when grid
voltage changes.
Lock-in/Pn 5%: When the inverter active power is less
than 5% rated power, the V(Q) mode will not take effect.
Lock-out/Pn 20%: If the inverter active power is
increasing from 5% to 20% rated power, the V(Q) mode
will take effect again.
For example: V2=110%, P2=80%. When the grid voltage reaches 110% of the rated grid voltage,
inverter will reduce its active power output to 80% of the rated power.
For example: V1=94%, Q1=44%. When the grid voltage reaches 94% of the rated grid voltage,
inverter will output reactive power that accounts for 44% of the rated power.
For the detailed setup values, please follow the local grid code.
P(Q): It is used to adjust the output reactive power of
inverter according to the set active power.
P(PF): It is used to adjust the PF of inverter according
to the set active power.
For the detailed setup values, please follow the local
grid code.
Lock-in/Pn 50%: When the output active power of
inverter is less than 50% of inverter's rated power, it
won't enter the P(PF) mode.
Lock-out/Pn 50%:When the output active power of
inverter is higher than 50% of inverter's rated power,it
will enter the P(PF) mode.
Note : only when the grid voltage is equal to or higher
than 1.05 times of the rated grid voltage, then the P(PF)
mode will take effect.
5.8.3 Grid Parameter Check
Basic
Set
Time Syncs Beep Auto Dim
24-Hour
Basic Setting
Year Month Day
Hour Minute
Lock out all changesFactory Reset
2019 03
09 15
17
Bekijk gratis de handleiding van Deye SUN-30K-SG01HP3-AU-BM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Deye |
| Model | SUN-30K-SG01HP3-AU-BM3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7923 MB |
