Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 27 van 84
27
How to Set Up Your Footage Conguration Starting From an Organ Preset
How to Set Up Your Footage Configuration
Starting From an Organ Preset
1. Select a preset organ sound. See "Selecting Presetted
Organ Sounds" (p. 26).
The display shows a main page like this:
The organ tone is shown as follows:
Organ Type
Footage Volume
2. Press the 'T2L EDIT' function button and using the []
[] buttons select the organ tone (rst row). The numbers
indicate the volume for each footage.
3. Press the [] button to access the 'DRAWBAR' editing
page.
The page shows the volume of each footage.
4. Use the [] [] buttons to select the previous or next
footage.
5. Use the [] [] buttons to increase the volume in
incremental steps from 0 (no sound) to 8 (maximum
volume).
6. Press the [FULL] function button to move the drawbar
down (maximum volume).
7. Press the [CANCEL] function button to move the drawbar
up (minimum volume).
8. Press the 'PRESET' function button to select another
organ preset. This shortcut is useful for recalling another
preset without exiting the drawbar edit page.
NOTE
Attention, changes may be lost if you recall another preset. If
you wish, you can save your conguration in a memory and
then recall it at another time. See "Saving Your Settings in the
Internal Memory" (p. 45).
Adding Harmonic Percussion
It's the classic crisp attack unique to the vintage organ. This eect was
designed to emulate the percussive sounds of the harp, xylophone and
marimba. When the percussion is selected, this feature adds a decaying
second- or third-harmonic overtone when a key is pressed.
NOTE
The harmonic percussion feature is available for the TW1 and
TW2 organ type and only on the MAIN or LOWER keyboard part.
1. From the 'T2L ORGAN EDIT' page, use the [] []
buttons to select 'PERCUSSION'.
2. Press the [] button to access the 'PERCUSSION' page.
3. Use the [], [] buttons to select the parameter and use
the [] [] buttons to adjust the value. See "Moving the
Cursor and Setting Parameter Values" (p. 21).
Parameter Setting Explanation
Switch OFF, ON Select 'ON' to activate the eect.
Volume Normal, Soft
Select between a 'Normal' or 'Soft'
percussion levels.
Decay Slow, Fast Select between a 'Slow' or 'Fast' decay.
Harmonic 3rd, 2nd
Select to add a '3rd' or '2nd' harmonic
to the percussion.
NOTE
Attention, changes may be lost if you recall another preset. If
you wish, you can save your conguration in a memory and
then recall it at another time. See "Saving Your Settings in the
Internal Memory" (p. 45).
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
