Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 28 van 84
28
Organ Section
The Morphing Function
The new footage conguration is typically applied immediately when you
recall an organ preset. However, when the Morphing function is active
(default), it transitions smoothly over a congurable duration instead of
being applied instantly.
1. Press [MENU/EXIT] button and select SETTINGAUTO MORPHING
function using the [], [] and [] buttons. See "Moving
the Cursor and Setting Parameter Values" (p. 21).
The following page is shown.
2. Use the [], [] buttons to select the 'Switch' parameter
and use the [] [] buttons to activate or deactivate the
Morphing function.
3. Use the [], [] buttons to select the 'Rate' parameter
and the [] [] buttons to set the transition time value
you want: Slow, Medium, or Fast.
MEMO
The morphing's settings can be saved in the memories. See
"Working with the Memories" (p. 45).
Applying Vibrato/Chorus Eect
The VIVO S2 has a vibrato eect and a chorus eect to enrich your
performances. The vibrato and chorus system consists of six settings, V1,
V2, V3, C1, C2 and C3 (i.e., 3 vibrato and 3 chorus), which can be selected
from the 'VIBRATO / CHORUS' page in the 'T2L EDIT' environment.
1. From the 'T2L ORGAN EDIT' page, use the [] []
buttons to select 'VIBRATO/CHORUS'.
2. Press the [] button to access the 'VIBRATO/CHORUS'
page.
3. Use the [], [] buttons to select the parameter and use
the [] [] buttons to adjust the value. See "Moving the
Cursor and Setting Parameter Values" (p. 21).
Parameter Setting Explanation
Switch OFF, ON Select 'ON' to activate the eect.
Parameter Setting Explanation
Type
V1,C1 Vibrato or Chorus light depth eect.
V2, C2 Vibrato or Chorus standard depth eect
V3,C3 Vibrato or Chorus deepest eect
TREMULANT
TYPE 1 ~ TYPE 6
It's a characteristic eect of the pipe
organ that produces a uctuation of
the amplitude and pitch of the sound,
producing a tremolo and vibrato eect.
NOTE
This eect can be selected in the
presence of an pipe organ sound.
Main OFF, ON
Select 'ON' to activate the eect for the
Upper part.
Lower/Bass OFF, ON
Select 'ON' to activate the eect for the
Lower/Pedal parts.
NOTE
Attention, changes may be lost if you recall another preset. If
you wish, you can save your conguration in a memory and
then recall it at another time. See "Saving Your Settings in the
Internal Memory" (p. 45).
Adding Overdrive Eect
This is the typical eect of vacuum tube amplier and it is achieved by
'overdriving' the valves.
NOTE
This menu item is not present if a pipe type organ is selected.
1. From the 'T2L ORGAN EDIT' page, use the [] []
buttons to select 'OVERDRIVE'.
2. Press the [] button to access the 'OVERDRIVE' page.
3. Use the [], [] buttons to select the parameter and use
the
[] [] buttons to adjust the value. See "Moving the
Cursor and Setting Parameter Values" (p. 21).
Parameter Setting Explanation
Switch OFF, ON Select 'ON' to activate the eect.
Drive 1~100
Adjust the amount of eect. Also
changes the volume.
Tone 1~100 Adjusts the tonal quality of the sound.
Level 1~100
Use this parameter to compensate for
exaggerated level dierences resulting
from the settings you made.
Eq Low freq 80 ~ 400 Hz Selects the frequency of the low range.
Eq Low gain –12dB~0~12dB Gain of the low frequency range.
Eq High freq 800Hz ~ 8KHz Selects the frequency of the high range.
Eq High gain –12dB~0~12dB Gain of the high frequency range.
NOTE
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
