Delfield CAB2-813 handleiding
Handleiding
Je bekijkt pagina 24 van 28
24 Part Number: 9291468 09/17
Maintenance Section 4
FT2, LT & TT Series Self-Leveling Dispensers
Adjusting
Tools Needed
• Small flat head screw driver
• Phillips head screw driver
n
Warning
Wear safety glasses when adjusting your dispenser.
Also, lock brakes on mobile units before beginning.
1. Unload dispenser and remove stainless steel load tray
by lifting straight up and set it aside. For LT Models skip
to step #5.
Retainer
Retainer
Elevator Housings
Load Tray
Remove Load Tray
2. Use small regular screw driver to loosen each retainer
mounted on stainless steel rod at top of each elevator
housing.
3. To remove elevator housing, lift housing straight up
to clear the stud on unit base. Then gently swing the
bottom of the housing towards the inside of the unit
and pull housing out of the unit. Lay housing on flat
surface.
Remove Elevator Housing
4. Use Phillips head screw driver to remove front panel on
the elevator housing.
Remove Screws,
Slide Cover O
Remove Front Panel
Bekijk gratis de handleiding van Delfield CAB2-813, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delfield |
| Model | CAB2-813 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3813 MB |
