Handleiding
Je bekijkt pagina 9 van 16
Page 8
• “A” 1 x Stability chain
• “B” 1 x Stability hook with anchor sleeve
• “A” is factory fitted at the rear of the stove in
the centre. (See overleaf for instructions if the
removable splashback is to be fitted)
• Position the stove and move “A” to touch the
wall behind the stove.
• Mark the hole where “A” touches the wall
behind the stove.
• Move the stove away from the wall to allow for
an area to work in.
All stoves can tilt if you or a child sit or lean on an open oven door. Safety regulations
stipulate that the ANTI-TILT mechanism supplied with the stove, must be fitted as shown.
• Using a 8.0 mm concrete bit, drill a hole at
the marked position.
• Using the Stability hook and anchor sleeve
“B”, firmly secure “B” to the wall.
• Slide the stove back in position and engage
the stability chain “A” onto the Stability hook
“B”. It is recommended to secure the chain
on the third link from the rear of the cooker.
• The stove is then secured and will not
accidentally tilt if downward pressure is
applied to the open oven door.
Anti-tilt mechanism
Fitting the removable splash panel
Items Supplied:
A – M4 Bolts p9-x2
B – Splash Panel p9-x1
C – Nut p9-x2
D – Washer p9-x2
Bekijk gratis de handleiding van Defy DGS578, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Defy |
| Model | DGS578 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2350 MB |
