Handleiding
Je bekijkt pagina 9 van 39
9
UK DE CN FR ES
to the minimum seing. The screws are appropriately tightened, when the gasket on
the rear of the loudspeaker is compressed and the bezel of the loudspeaker is flush
with the mounting surface.
If you need to remove the loudspeaker, loosen the screws approximately 5 to 20
turns counter clockwise and the brackets will loosen their grip. NOTE: do not
unscrew more than 20 to 25 turns or the brackets may fall o the screws.
If you are mounting the loudspeaker in very thick wall material, it might be needed
to dismount the dogleg brackets from the screws and aerwards mounting them
upside down. Opposite mounting of the doglegs will make it possible to mount the
loudspeaker in boards with up to 2.05”/ 52mm thickness (see figure 5).
4.2 Grille
The front grille is fixed in place by the magnets incorporated into the front bae of
the DALI PHANTOM M-80A.
NOTE: There is an optional square grille available for order.
NOTE: On the inside of the grille there is a piece of non-woven. The non-woven is on
the grille to protect the drivers against dust and dirt. Therefore the non-woven must
remain on the grille.
4.3 Adjustment of Switches
When the grille is removed from the loudspeaker, you will see the woofer and the
tweeter and one or two switches (see figure 6). The switches can be used to adjust
the sound from the loudspeaker to a custom setup. The switches can be operated
independent of each other.
One switch can increase the tweeter level 3dB if it is switched from the “Normal”
seing to the “High+” seing.
The other switch can increase the midrange level by 3dB when switched from the
“Normal” seing to the “Mid+” seing.
4.4 Loudspeaker Rotation – Using the Compass
When the grille is removed you can see a compass ring round the edge of the
loudspeaker bezel, which can be used to read out the rotation of the loudspeaker
relatively to, for example, a fixed line on the ceiling. The M-80A bezel compass markings
make rotation for optimum sound dispersion simple. Aim the 0 degree compass
marking on the speaker bezel, towards the main listening position, for optimum sound
dispersion. The tweeter is slightly o-centre and should be positioned so it is closest
to the main listening position (see figure 7).
4.5 Connection of Cables/Selection of Cables
Your choice of cables is a crucial element in your installation. Be aware that replacing
cables aer installation is a dicult task. Therefore, select quali cables from the
beginning. Please consult your authorized DALI dealer for further advice on which
cable to select.
Bekijk gratis de handleiding van Dali Phantom M-80 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dali |
| Model | Phantom M-80 A |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3249 MB |
