Dali Phantom CI AMP-4750 DSP handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 4 van 16

3. Pack Contents

1 × Amplifier unit

2 × Two channel balanced input

connector

2 × Two channel output connector

1 × GPIO socket connector

1 × Mains power cable

4 × Adhesive rubber feet

The AMP-4750 DSP amplifier is shipped in a cardboard

carton containing the amplifier unit, accessories, a mains

cable appropriate for the sales territory, and a document

pack. The full contents is illustrated below.

4. Installation

4.1 Amplifier Location

The AMP-4750 DSP amplifier is shipped with rack

“ears” aached and are primarily intended for standard

(19inch) equipment rack installation.

If not to be installed in an equipment rack, the AMP-

4750 DSP amplifier can be placed free-standing on a

flat surface. Adhesive rubber feet are supplied for this

Diagram1A

AMP-4750 DSP amplifier dimensions

440mm

17.3inches

332mm

13.1inches

88mm

3.5inches

Grey regions illustrate ventilation

space requirements.

For rack mount installation aach the

amplifier to the rack uprights using

standard rack-mount M6 bolts and

nuts.

For free-standing installation aach

the supplied adhesive feet to the am-

plifier underside.

Do not switch on the amplifier until all

input and output connections have

been made.

purpose. The rack ears can be removed if desired by

unscrewing the six securing screws (three each side).

It is important that any installation provides space for

airflow through the ventilation apertures at the front and

rear of the amplifier. This is illustrated in Diagram1A.

6 7

12345678910111213141516/ 16

Bekijk gratis de handleiding van Dali Phantom CI AMP-4750 DSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd