Dali Phantom CI AMP-4750 DSP handleiding
Handleiding
Je bekijkt pagina 3 van 16
2. Overview
The AMP-4750 DSP is a full rack width, 2U format four
channel power amplifier rated at 750 Was per channel.
It is able to power up to eight mixed DALI loudspeakers or
passive subwoofers simultaneously. The AMP-4750 DSP
provides four analogue inputs and one stereo S/PDIF
digital input.
The AMP-4750 DSP is comprehensively equipped with
DSP (digital signal processing) functions that enable
it to be configured via the DALI PHANTOM CI AMP
CONFIGURATOR and with specific presets designed for
individual DALI loudspeaker models.
The AMP-4750 DSP is by default configured without
any loudspeaker presets assigned to output channels,
however it incorporates a locally stored library of DALI
loudspeaker presets. Installing and assigning presets is
covered in Section5 of this manual. Additional or updated
DALI loudspeaker presets may also be downloaded from:
dali-loudspeakers.com
NOTE:
The AMP-4750 DSP amplifier can be used without any
loudspeaker presets installed and assigned. In this case it
will behave as a conventional four output power amplifier.
2.1 DALI PHANTOM CI AMP
CONFIGURATOR
The DALI PHANTOM CI AMP-4750 DSP provides
comprehensive DSP based configuration menus
accessible via the DALI PHANTOM CI AMP
CONFIGURATOR interface.
Access to the AMP CONFIGURATOR interface is made
through wired (Ethernet) or wireless (WiFi) network
connection to the AMP-4750 DSP either directly from a
configuration device such as a smart phone or computer,
or via a network router or switch.
The AMP CONFIGURATOR covers Loudspeaker
presets, Inputs, Outputs and General Seings and is
described in Sections 5 and 8 of this manual. Connecting
the AMP-4750 DSP to a wired or wireless configuration
device or network is described in Section5.2.
1. Introduction
The DALI PHANTOM CI AMP-4750 DSP amplifier is
designed to provide high performance and configurable
audio power amplification for all DALI PHANTOM custom
install loudspeakers and subwoofers. It can however
also be used to power conventional DALI passive hi-fi
loudspeakers.
This manual covers the features, installation and
functions of the AMP-4750 DSP. Please read the manual
fully before installing and using the amplifier. If you
have any questions regarding amplifier configuration,
installation or operation please contact your DALI
retailer or installer, or DALI directly via the support
pages at dali-loudspeakers.com.
2.2 Amplifier Connections
and Power Switching
AMP-4750 DSP signal input and output connections
are accomplished via RCA Phono and Euroblock
sle connectors. A GPIO (General Purpose In/Out)
Euroblock connector enables some amplifier functions
to be controlled externally, and wireless or RJ45 socket
Ethernet network connection options are also provided.
Cable connectors and connections are described and
illustrated in Section6 of this manual. Connection and
use of the GPIO socket is described in Section5.5.
AMP-4750 DSP amplifier incorporates a front panel
mounted power buon. Press the buon once
to switch the amplifier on or o. Amplifier power
management behaviour can be configured via the AMP
CONFIGURATOR interface [Seings] menu described in
Section5 of this manual.
2.3 Firmware
This manual describes the features, functions and
user interface of the AMP-4750 DSP amplifier running
Firmware Version 1.7.x.
It is strongly recommended that the firmware version
installed in the amplifier in use is checked initially, and
regularly thereaer. If updated firmware is available, the
amplifier should be updated as a priori.
The firmware installed in the amplifier can be identified
and updated by selecting the [Device] option in the AMP
CONFIGURATOR interface [Seings] menu. Firmware
versions can be checked, and firmware downloaded, from
the website: dali-loudspeakers.com
Contents
1. Introduction 4
2. Overview 5
3. Pack Contents 6
4. Installation 7
5. Initial Configuration 8
6. Connections 12
7. Operation 18
8. Advanced Configuration 20
9. Specifications 31
4 5
Bekijk gratis de handleiding van Dali Phantom CI AMP-4750 DSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dali |
| Model | Phantom CI AMP-4750 DSP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3633 MB |