Daizuki DX1C18426-21 handleiding

49 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 30 van 49
If you are installing the outdoor unit on the ground, or a concrete
mounting platform, use the following steps:
1. Mark the positions for four expansion bolts based on dimensions in the Mounting Dimensions
chart and illustrations above.
2. Pre-drill holes for expansion bolts.
3. Clean concrete dust away from the holes.
4. Place a nut on the end of each expansion bolt.
5. Hammer expansion bolts into the pre-drilled holes.
6. Remove the nuts from the expansion bolts,and place outdoor unit on bolts.
7. Put a washer on each of the expansion bolts,then reinstall the nuts.
8. Using a wrench,tighten each nut until snug.
1. Mark the position of the bracket holes based on the dimensions in the Mounting Dimensions
chart on the previous page.
2. Pro-drill the holes for the expansion bolts.
3. Clean dust and debris away from the holes.
4. Place a washer and nut on the end of each expansion bolt.
5. Thread expansion bolts through the holes in the mounting brackets.Then,put the mounting
brackets in position and hammer the expansion bolts into the wall.
6. Check that the mounting brackets are level.
7. If the feet of the outdoor unit have rubber pads already installed, and you are using a local,
dealer s wall-mounting bracket,remove them before attempting to mount the condenser to the
bracket.The mounting bracket has rubber isolating pads on it that will take the place of these.
8. Carefully lift the unit and place its mounting feet on the brackets.
9. Then, bolt the unit firmly to the brackets.
WHEN DRILLING INTO CONCRETE,EYEPROTECTION IS RECOMMENDED AT
ALL TIMES.
WARNING
Before installing a wall-mounted unit,make sure that the wall is made of solid
brick, concrete,or a similarly strong material. The wall must be able to support
at least 4 times the weight of the unit.
CAUTION
If allowed, you can install the wall-mounted unit with rubber gaskets to
reduce vibration and noise
TO REDUCE VIBRATION OF WALL-MOUNTED UNIT
If you are installing the unit on a wall-mounted bracket, follow these steps:
!
Page 30

Bekijk gratis de handleiding van Daizuki DX1C18426-21, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDaizuki
ModelDX1C18426-21
CategorieAirco
TaalNederlands
Grootte6253 MB