Daikin FXFA100AVEB (Preliminary) handleiding

Airco

Daikin

28 pagina's

PDF beschikbaar

Handleiding

12 Unit installation

Installation and operation manual

FXFA20~125A2VEB

VRV system air conditioner

3P599604-1E – 2022.02

≥1500 ≥500 ≥200

A A A

b c

a Air outlet and corners open

b Air outlet closed, corners open (optional blocking pad kit

required)

c Air outlet and corners closed (optional blocking pad kit

required)

▪ B: Minimum and maximum distance to the floor:

▪ Minimum: 2.5m to avoid accidental touching.

▪ Maximum: Depends on the airflow directions and the capacity

class. See "16.1Field setting"[421].

INFORMATION

Maximum distance to the floor for the 3-way and the 4-way

airflow (which require an optional blocking pad kit) may

differ. See the installation manual of the optional blocking

pad kit.

INFORMATION

Some options may require additional service space. Refer

to the installation manual of the used option before

installation.

12.2 Mounting the indoor unit

12.2.1 Guidelines when installing the indoor unit

INFORMATION

Optional equipment. When installing optional equipment,

also read the installation manual of the optional equipment.

Depending on the field conditions, it might be easier to

install the optional equipment first.

▪ Decoration panel. Install the decoration panel always after

installing the unit.

NOTICE

After installing the decoration panel:

▪ Make sure there is no gap between the unit body and

the decoration panel. Possible consequence: Air

might leak and cause dew drop.

▪ Make sure no oil remains on the plastic parts of the

decoration panel. Possible consequence:

Degradation and damage of plastic parts.

▪ Ceiling strength. Check whether the ceiling is strong enough to

support the weight of the unit. If there is a risk, reinforce the ceiling

before installing the unit.

▪ For existing ceilings, use anchors.

▪ For new ceilings, use sunken inserts, sunken anchors or other

field supplied parts.

A 50~100mm: In case of installation with standard panel

100~150mm: In case of installation with fresh air intake

kit or design panel

130~180mm: In case of installation with auto cleaning

decoration panel

a Ceiling slab

b Anchor

c Long nut or turnbuckle

d Suspension bolt

e Suspended ceiling

▪ Suspension bolts. Use M8~M10 suspension bolts for installation.

Attach the hanger bracket to the suspension bolt. Fix it securely

using a nut and washer from the upper and lower sides of the

hanger bracket.

(mm)

780

710

4×

a1 Nut (field supply)

a2 Double nut (field supply)

b Washer (accessories)

c Hanger bracket (attached to the unit)

▪ Paper pattern for installation (upper part of the packing). Use

the paper pattern to determine the correct horizontal positioning. It

contains the necessary dimensions and centers. You can attach

the paper pattern to the unit.

a cb d

a Centre of the unit

b Centre of the ceiling opening

c Paper pattern for installation (upper part of the packing)

d Screws (accessories)

▪ Ceiling opening and unit:

▪ Make sure the ceiling opening is within the following limits:

Minimum: 860mm to be able to fit the unit.

Maximum: 910 mm to ensure enough overlap between the

decoration panel and the suspended ceiling. If the ceiling

opening is larger, add extra ceiling material.

▪ Make sure the unit and its hanger brackets (suspension) are

centered within the ceiling opening.

(mm)

710

840

860~910

950

780

840

860~910

950

a Drain piping

b Refrigerant piping

c Hanger bracket pitch (suspension)

d Unit

e Ceiling opening

f Decoration panel

Bekijk gratis de handleiding van Daikin FXFA100AVEB (Preliminary), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.