Daikin EPVX14SU23A handleiding
Handleiding
Je bekijkt pagina 10 van 20
5 Operation
Operation manual
10
EPVX10+14S(U)18+23A + EPBX10~14A
Daikin Altherma 4 H F+W
4P773378-1 – 2024.11
5.3.3 Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.
20
b
a c
11:05 21.0°C
Scheduled next
Main zone
Set temperature to…
Item Description
a Desired temperature. Tap in the upper or lower area to
increase/decrease the temperature. Note: As an alternative
you can use the slider area (b).
b Slider. Swipe up/down or tap the up/down arrows in this
area to increase/decrease the temperature.
c Scheduled next (if scheduling is enabled).
5.4 Turning operation ON or OFF
5.4.1 To turn ON or OFF
Space heating/cooling operation
NOTICE
Room frost protection. Even if you turn OFF space
heating/cooling operation, room frost protection operation –
if enabled– can still activate. However, for external room
thermostat control, the protection is only active in case of a
thermostat request.
NOTICE
Water pipe freeze prevention. Even if you turn OFF
space heating/cooling operation, water pipe freeze
prevention –if enabled– will remain active.
In case you want to turn off ALL space heating/cooling:
1
In the home screen, tap the icon in the Space heating/
cooling bar.
Result: When OFF, the Space heating/cooling screen area
is greyed out.
In case you only want to turn off an individual zone:
1 Go to:
▪ [1.17] Main zone > Enable zone.
▪ [2.15] Additional zone > Enable zone.
2 Switch the zone OFF:
Enable zone
Result: When OFF, the zone screen area is greyed out.
Tank heating operation
NOTICE
Disinfection mode. Even if you turn OFF tank heating
operation, disinfection mode will remain active.
NOTICE
It is recommended to set disinfection mode to once a day
(setting [4.10] Disinfection > Every day).
1
In the home screen, tap the icon in the Domestic hot
water bar.
Result: When OFF, the Domestic hot water screen area is
greyed out.
5.5 Reading out information
To read out information
1 Go to [6]: Information.
Possible read-out information
In menu… You can read out…
[6.1] Energy data Produced energy and consumed
electricity.
[6.2] Dealer information Contact/helpdesk number
[6.3] Sensors Room, tank or domestic hot
water, outside, and leaving water
temperature (if applicable)
[6.4] Actuators Status/mode of each actuator
Example: Domestic hot water
pump ON/OFF
[6.5] Operation modes Current operation mode
Example: Defrost/oil return
mode
[6.6] About Contains:
▪ Version information about the
system
▪ Serial numbers
▪ Model name
▪ Build info
5.6 Space heating/cooling control
5.6.1 Setting the space operation mode
About space operation modes
Your unit is a heating/cooling model, it can both heat up and cool
down a space. You have to tell the system which operation mode to
use.
To tell the system which space operation to use, you can:
You can… Location
Check which space operation mode is
currently used.
Home screen
Set the space operation mode permanently. Main menu
Restrict automatic changeover according to
a monthly schedule.
To set the space operation mode
1 Go to [3.2]: Space heating/cooling > Operation mode
2 Select one of the following options:
▪ Heating: Only heating mode
▪ Cooling: Only cooling mode
▪ Automatic: The operation mode changes automatically
between heating and cooling based on the outdoor
temperature. Restricted per month according to the
Operation mode schedule [3.5].
Remark: The operation mode (heating or cooling) will be decided by
the external room thermostat in case:
▪ there is only one zone (main zone),
▪ and the main zone is controlled by an external room thermostat,
Bekijk gratis de handleiding van Daikin EPVX14SU23A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EPVX14SU23A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3173 MB |
