Daikin BRP069A62 handleiding
Handleiding
Je bekijkt pagina 19 van 52
5 | Installation
Installer reference guide
19
BRP069A61+BRP069A62
Daikin Altherma LAN adapter
4P464229-1E – 2023.11
5 Installation
5.1 Overview: Installation
The installation of the LAN adapter consists of the following stages:
1 Mounting the rear casing to the wall
2 Mounting the PCB to the rear casing
3 Connecting electrical wiring
4 Mounting the front casing to the rear casing
5.2 Mounting the adapter
5.2.1 About mounting the adapter
The LAN adapter is mounted to the wall by way of the mounting holes (a) in the
rear casing. Before mounting the rear casing to the wall, you have to remove some
knockout holes (b)(c), depending on how you want to route the wiring and insert it
into the adapter.
You can route and insert the wiring from the bottom or from the rear. Respect the
following rules and restrictions:
Wiring Possibilities and restrictions
Wiring routed and inserted from the
bottom
▪ ONLY for surface wiring routed from
the bottom.
▪ When routing wiring from the
bottom, ALWAYS let it enter the
adapter via the holes in the bottom of
the casing (b). It is NOT allowed to
clamp this wiring between the casing
and the wall and let it enter via the
holes in the rear (c).
▪ The wiring for X1A and X4A MUST be
routed and inserted from the bottom.
The wiring for X2A and X3A CAN be
routed and inserted from the bottom
(or from the rear).
▪ When routing and inserting wiring
from the bottom, remove the
required knockout holes in the
bottom of the casing (b) and replace
them with the grommets from the
accessory bag.
Bekijk gratis de handleiding van Daikin BRP069A62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | BRP069A62 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6620 MB |
