Daikin BRP069A62 handleiding
Handleiding
Je bekijkt pagina 20 van 52
5 | Installation
Installer reference guide
20
BRP069A61+BRP069A62
Daikin Altherma LAN adapter
4P464229-1E – 2023.11
Wiring Possibilities and restrictions
Wiring routed and inserted from the
rear
▪ ONLY for in‑wall wiring entering the
adapter from the rear.
▪ The wiring for X2A and X3A CAN be
routed and inserted from the rear (or
from the bottom). The wiring for X1A
and X4A CANNOT be routed and
inserted from the rear.
▪ It is NOT allowed to route wiring from
the bottom, clamp it between the
casing and the wall, and let it enter via
the holes in the rear (c).
a a
b b b
a
c
c
a Mounting holes
b Bottom knockout holes
c Rear knockout holes
INFORMATION
Wiring from the bottom. ALWAYS replace any removed knockout holes with the
grommets delivered in the accessory bag. Before inserting the grommets into the
holes, cut them open with a utility knife, so that you can let the wiring enter the
adapter through the grommets. The grommets MUST be inserted into the holes
before you insert the wiring into the adapter.
NOTICE
Wiring from the rear. When removing knockout holes, make sure to remove any
sharp edges that might arise around the holes, this to protect the wiring from
damage.
INFORMATION
▪ Letting the wiring enter the adapter from the rear allows you to hide the wiring in
the wall.
▪ It is NOT possible to let the Ethernet cable enter from the rear. The Ethernet
cable is ALWAYS connected from the bottom.
Bekijk gratis de handleiding van Daikin BRP069A62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | BRP069A62 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6620 MB |
