Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 131 van 228
118
Table 4-43 Description of serial port settings parameters
Parameter Description
Address
The corresponding device address. It is 1 by default.
Make sure that the address is the device address; otherwise you cannot
control the device.
Baud Rate Select the baud rate for the camera. It is 9600 by default.
Date Bit It is 8 by default.
Stop Bit It is 1 by default.
Parity It is
None
by default.
Step 3 Click
Save
.
4.8.5.2 External Light
You need to configure external light mode when the external light is used.
Prerequisites
ā
Connect external light with RS-485 port.
ā
You have configured serial port parameters. For details, see "4.8.5.1 Serial Port Settings".
Procedure
Step 1 Select
Setting
>
System
>
Peripheral
>
External Light
.
Figure 4-122 External light
Step 2 Configure external light work mode.
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
