Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 132 van 228
119
Table 4-44 Description of external light parameters
Parameter Description
Work Mode
●
Off
: Turn off the external light.
●
Manual
: Set the light brightness manually.
●
Auto
: The camera turns on or turns off the light according to the
light time and photoresister automatically.
Auto Mode
●
Time
: When selecting
Time
in
Auto Mode
, click
Setting
to set
the arming period. During the arming period, the external light is
on. For details of arming period setting, see "5.1.1.1 Setting
Period".
●
Photoresister
: When you select
Photoresister
in
Auto Mode
,
the system turns on the external light according to the brightness
automatically.
Light Brightness Set the brightness of the external light.
Step 3 Click
Save
.
4.8.5.3 Wiper
Step 1 Select
Setting
>
System
>
Peripheral
>
Peripheral
>
Wiper
.
Figure 4-123 Wiper
Step 2 Configure wiper work mode.
Table 4-45 Description of wiper parameters
Parameter Description
Interval Time
The interval time between stop mode and start mode. For example, set
the time to10 s, and the wiper will work every 10 s.
Start Set the work status of the wiper.
●
Start: Click
Start
, and the wiper works as the set interval time.
●
Stop: Click
Stop
, and the wiper stops working.
●
Once: Click
Once
, and the wiper works once.
Stop
Once
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
