Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 101 van 228
88
Table 4-30 Description of QoS parameters
Parameter Description
Realtime Monitor
Configure the priority of the data packets that used for network
surveillance. 0 for the lowest and 63 the highest.
Command
Configure the priority of the data packets that used for configure or
checking.
Step 3 Click
Save
.
4.6.12 5G
5G configuration includes dialing configuration and mobile configuration. Install SIM card
(Subscriber Identification Module) to the camera, and connect it to 5G network through dialing
configuration and mobile configuration.
ā
Dialing configuration: Connect the camera to 5G network in a specific period.
ā
Mobile configuration: Configure the mobile phone to receive the linkage message. When an
alarm is triggered, the system sends an alarm message to the receiver, and then the receiver can
active the camera and connect it to 5G network through message or call.
4.6.12.1 Dialing Setting
Configure the camera to connect it to 5G network.
Step 1 Select
Setting
>
Network
>
5G
>
Dialing Setting
.
Step 2 Select the
Enable
checkbox, and configure the parameters.
Figure 4-85 Dialing setting
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
