D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 37 van 761
DGS-6604 m/ mSW Rls. 1.00.029 accept dhcp relay-agent
CLI Reference Guide
6
accept dhcp relay-agent
To accept relay agent information use the accept dhcp relay-agent command,
use the no form of the command to reject DHCP relay agent information.
accept dhcp relay-agent [circuit-id|remote-id]
no accept dhcp relay-agent [circuit-id|remote-id]
Default DHCP relay-agent is not accepted.
Command Mode DHCP pool configuration
Usage Guideline If either of circuit-id and remote-id is not specified, it implys that both the circuit-id
and remote-id options are applied with the command. If only the circuit-id or
remote-id is specified, it implies that it only accepts DHCP packets containing
either only a circuit-id or a remote-id.
Examples The following example sets DHCP pool1 to accept circuit id and remote id relay
agent information.
The following example sets DHCP pool1 to not accept remote id relay agent
information.
Syntax Description
circiut-id (Optional) Agent Circuit ID Sub-option.
remote-id (Optional) Agent Remote ID Sub-option
switch > enable
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# accept dhcp relay-agent
switch(config-dhcp)#
switch > enable
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# no accept dhcp relay-agent remote-id
switch(config-dhcp)#
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
