D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 36 van 761
DGS-6604 m/ mSW Rls. 1.00.029 accept dhcp client-identifier
CLI Reference Guide
5
accept dhcp client-identifier
Use this command to turn on validation checking of the Client Identifier. Use the
no form of the command to turn off validation checking of the Client Identifier.
accept dhcp client-identifier
no accept dhcp client-identifier
Syntax None
Default client identifer: not evaluated
Command Mode DHCP pool configuration
Usage Guideline To validate the DHCP Client Identifier value sent by the client. If a DHCP client
sends a DHCP Client Identifier option, the DHCP server validates the value to
ensure it matches the hardware type and client hardware address. If the values
match, the DHCP server provides service to the client. If the values do not
match, the DHCP server does not respond to the client's request.
If the command is used to set the validation to not check the DHCP Client
Identifier value sent by the client, then the DHCP server only checks the
matching of the client's hardware type and hardware address as a host ID.
Example The following example sets the DHCP pool1 to check the validation of the client
identifier option as DHCP pool1 offers IP addresses.
switch > enable
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# accept dhcp client-identifier
switch(config-dhcp)#
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
