D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 38 van 761
DGS-6604 m/ mSW Rls. 1.00.029 accept-lifetime
CLI Reference Guide
7
accept-lifetime
The accept-lifetime command is used to set a time period when an authentication
key on a key chain is accepted as the valid key.
accept-lifetime START-TIME { infinite | END-TIME | duration SECONDS }
Default Infinite
Command Mode Key-chain key configuration
Usage Guideline Only Routing Information Protocol (RIP) Version 2 uses key chains.
Specify a start time value and one of the following values: infinite, end-time, or
duration seconds.
Syntax Description
START-TIME The beginning time that the key specified, by the key command, is valid to be
received. The syntax can be either of the following:
HH:MM:SS MONTH DATE YEAR
HH:MM:SS DATE MONTH YEAR
HH-hours MM-minutes SS-seconds MONTH-first three letters of the month
DATE-date (1-31) YEAR-year (four digits)
The default start time and the earliest acceptable date is January 1, 1993.
infinite Key is valid to be received from the start-time value on.
END-TIME Key is valid to be received from the start-time value until the end-time value.The
syntax is the same as that for the START-TIME. The end-time value must be
after the start-time value. The default end time is an infinite time period.
duration SECONDS Length of time (in seconds) that the key is valid to be received. The range is from
1 to 2147483647 (signed long).
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
