CYP SDV-C2-TX handleiding
Handleiding
Je bekijkt pagina 10 van 36
5
7
+ (PLUS) Button: Press to move up or adjust selections within OSD
menus. When not in a menu, press to toggle the input source for the
HDMI output.
8
ENTER/INFO Button: When inside an OSD menu, press to conrm a
selection or to go deeper into a menu item. When not in a menu, press
to activate the Information OSD.
6.2 Rear Panel
DC 12V
USB/SERVICE
LAN
RS-232
TX RX
CAT6A/7 OUTDP IN
IN
IR
OUTINOUT
AUDIO
INOUT
HDMI
1
2 3 4 5 6
7 8
9
10
1
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
2
HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
3
DP IN Port: Connect to DisplayPort source equipment such as a PC or
laptop.
4
CAT6A/7 Port: Connect directly to a compatible receiver for Point-
to-Point extension, or to a 10 Gigabit Ethernet switch for distributed
matrixing (requires IP Master Controller or control software), with a
single Cat.6A/7 cable for extension of all data signals.
Note: If the connected network switch supports the IEEE 802.3at-2009
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
5
AUDIO PORTS:
OUT Port: Connect to powered speakers or an amplifier for stereo
analogue audio output.
IN Port: Connect to the stereo analogue output of a device such as
a CD player or PC.
Note: When units are connected directly in a Point-to-Point
configuration, audio is routed directly from the IN Ports to the opposite
end’s OUT Ports. Free routing can only be configured by use of the
optional IP Master Controller or control software.
Bekijk gratis de handleiding van CYP SDV-C2-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-C2-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2509 MB |
