CYP SDV-C2-TX handleiding
Handleiding
Je bekijkt pagina 11 van 36
6
6
IR PORTS:
OUT Port: Connect to an IR Blaster to broadcast IR signals from a
connected receiver to devices within direct line-of sight of the IR
Blaster.
IN Port: Connect to an IR Extender to receive IR control signals and
extend them to devices connected to a connected receiver. Ensure
that the remote being used is within direct line-of-sight of the IR
Extender.
Note: Currently, only 38KHz IR signal extension is supported.
7
RS-232 3-pin Terminal Block: Connect directly to a PC, laptop or
serial controllable device with a 3-pin adapter cable to extend the RS-
232 signal between units.
8
LAN Port: Connect to an Ethernet supporting device or to your local
network as appropriate to extend the network between units.
9
USB/SERVICE (Mini-B) Port: Connect directly to a standard USB host
such as a PC or laptop to extend their USB functionality to all currently
connected/routed USB devices.
Note: This port is only active when “USB Control Mode” is set to “Device”. In
a Point-to-Point extension configuration, only one of the two units should
be set as a USB Device to avoid conflicts.
10
DC 12V Port: Plug the 12V DC power adapter into this port and
connect it to an AC wall outlet for power.
Note: Optional, not required if the unit is powered via PoE.
Bekijk gratis de handleiding van CYP SDV-C2-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-C2-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2509 MB |
