CYP PUV-1650RX handleiding
Handleiding
Je bekijkt pagina 28 van 92
28
3. Output Commands
COMMAND DESCRIPTION AND PARAMETERS
GET OUT PORT NUMBER
Show the number of available output ports
in the system.
GET OUT TYPE LIST
List the system’s output types.
SET OUT ROUTE N1
Switch the output routing source to input
N1.
N1 = 1 ~ 4 [Input number]*
Note: Both outputs will display the same
source except when Input 4 is selected.
Input 4 can only display on Output B on the
collaboration Rx.
SET OUT ROUTE NEXT
Switch the output routing source to the
next sequential input.
Note: Both outputs will display the same
source except when Input 4 is selected.
Input 4 can only display on Output B on the
collaboration Rx.
GET OUT ROUTE
Show the output’s current routing source.
SET OUT N1 AUDIO SOURCE N2
Set the output audio source.
N1 = A ~ B [Output letter]
Available values for N2:
1 [Follow Video]
2 [Use L/R Input]
GET OUT N1 AUDIO SOURCE
Display the output audio source setting.
N1 = A ~ B [Output letter]
SET OUT N1 AUDIO MUTE N2
Mute or unmute the audio of output N1.
N1 = A ~ B [Output letter]
Available values for N2:
OFF [Unmute]
ON [Mute]
GET OUT N1 AUDIO MUTE
Show output N1’s audio mute setting.
N1 = A ~ B [Output letter]
Bekijk gratis de handleiding van CYP PUV-1650RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
