CYP PUV-1650RX handleiding
Handleiding
Je bekijkt pagina 29 van 92
29
3. Output Commands
COMMAND DESCRIPTION AND PARAMETERS
SET OUT AUTO AUDIO N1
Set the output’s audio auto detection.
Available values for N1:
OFF [No auto-select]
ON [Auto-select]
GET OUT AUTO AUDIO
Show the current auto audio mode state.
GET OUT N1 HDCP STATUS
Show output N1’s current HDCP status.
N1 = A ~ B [Output letter]
GET OUT N1 HPD
Show output N1’s current hot plug
detection state.
N1 = A ~ B [Output letter]
GET OUT N1 RSENSE
Show output N1’s current RSENSE status.
N1 = A ~ B [Output letter]
SET OUT AUTO SWITCH N1
Enable or disable automatic source
switching.
Available values for N1:
OFF [Auto switch disabled]
ON [Auto switch enabled]
Note: Both outputs will display the same
source except when Input 4 is selected.
Input 4 can only display on Output B on the
collaboration Rx.
GET OUT AUTO SWITCH
Show the current auto switch mode state.
SET OUT N1 MASK B
Enable or disable mask setting on output N1
N1 = A ~ B [Output letter]
Available values for N1:
OFF [Mask disabled]
ON [Mask enabled]
Note: When an output is masked, all video,
including the banner, will be blanked out.
GET OUT N1 MASK
Display the output mask setting.
N1 = A ~ B [Output letter]
Bekijk gratis de handleiding van CYP PUV-1650RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
