CYP IP-7050RX-TG handleiding
Handleiding
Je bekijkt pagina 11 van 48
6
Note: By default this is set to the right (towards the Control Button ports)
and allows normal RS-232 functionality. Setting this switch to the left
enables ISP engineering mode.
13
CONTROL BUTTON 1~2 Ports: Connect to dedicated Trigger Buttons
(Optional, not included) which are used to change the currently
selected streaming channel. Pressing button 1 increases the channel
and pressing button 2 decreases it.
6.2 Transmitter's Rear Panel
DC 5V
LAN 1 (PoE)LAN 2LAN 3ISPRS-232HDMI OUTLINE OUTMIC IN OPT. OUT
TX
RX
2 31 4 85 6 7
1
MIC IN Port: Connect to an analogue microphone using a 3.5mm
plug. This audio will be sent to the analogue audio output on the
currently routed transmitter. (Unicast mode ONLY)
Note: The Mic In audio channel back to the transmitter is only active
when an analogue source is also connected to the Line In port on the
transmitter.
2
LINE OUT Port: Outputs stereo audio from the currently routed
transmitter (LPCM 2.0 sources only). Connect to powered speakers or
an amplifier for stereo analogue audio output.
3
OPT OUT Port: Outputs audio from the currently routed transmitter
(LPCM 2.0 & Bitstream sources only). Connect to powered speakers or
an amplifier for stereo analogue audio output.
4
HDMI OUT Port: Connect to HDMI TVs, monitors or amplifiers for
digital video and audio output.
5
RS-232 3-pin Terminal Block: Connect to a PC, laptop, or serial
controllable device with a 3-pin adapter cable for the extension
of RS-232 signals to the currently routed receiver. The baud rate is
configurable, but the default baud rate is 115200.
Note: When the transmitter is in multicast mode every connected receiver
unit can send RS-232 commands to the transmitter and commands sent
from the transmitter side will be sent to all associated receivers.
6
ISP Pinhole: This is for factory use only.
Bekijk gratis de handleiding van CYP IP-7050RX-TG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-7050RX-TG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3740 MB |
