CYP EL-8500VA handleiding
Handleiding
Je bekijkt pagina 45 van 88
45
6.6.7 System Tab
Click on the “System” tab to make changes to various system settings.
From this tab, you can change the WebGUI login username and password
as well as configure the RS-232/IR HDBaseT routing. Finally, this tab
provides buttons to reset the unit to factory defaults and to update the
firmware.
1) Web User Setting: This section allows for the login password to be
changed.
Note: The default user name and password is “admin”.
2) Network: IP mode may be switched between Static IP or DHCP.
In Static IP mode the IP, netmask and gateway addresses may be
manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses
automatically. Please press “Save” after making any changes to the IP
configuration or mode.
Note: If the IP address is changed then the IP address required for WebGUI/
Telnet access will also change accordingly.
Bekijk gratis de handleiding van CYP EL-8500VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-8500VA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5915 MB |
