CYP EL-8500VA handleiding
Handleiding
Je bekijkt pagina 46 van 88
46
3) Control Route Setting: These settings control the unit’s 2 relay ports
as well as defining the HDBaseT routing to use for the RS-232 and IR
ports on the unit.
■
Relay 1 & 2: Manually open or close Relay 1 and Relay 2. Selecting
“ON” closes the relay, selecting “OFF” opens it.
■
RS232: Use the dropdown to select which HDBaseT port the local
RS-232 port should route across. Available choices are HDBT Out,
HDBT In1, and HDBT In2.
■
IR: Use the dropdown to select which HDBaseT port the local IR
ports should route across. Available choices are HDBT Out, HDBT
In1, and HDBT In2.
4) Reset to Default: Press the “ALL Reset” button to reset the unit to its
factory default state. After the reset is complete, the unit will reboot
automatically.
5) Firmware Upgrade: To update the unit’s firmware, click the “Choose
File” button to open the file selection window and then select the
firmware update file (*.bin format) located on your local PC. After
selecting the file, click the “Upgrade” button to begin the firmware
update process. After the upgrade is complete, the unit will reboot
automatically.
Bekijk gratis de handleiding van CYP EL-8500VA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | EL-8500VA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5915 MB |
