CYP DS-VWC handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 48
12
number indicating their order to be added to the layout. If you
wish to re-order the units, type new ID numbers next to each
unit and click Arrange”. To remove an individual unit from the list,
click the “X” next to its name. To remove all units, click the Clear”
button.
After all desired displays have been added to the layout, each display
must be connected to so that they may be controlled. If some displays
that need to be a part of the layout are not currently available for
connection, dummy monitors may be added in their place. Displays that
are no longer a part of the layout may also be disconnected, or removed
completely. Each display can be connected or disconnected individually,
or as a group.
2) Connect Button: Clicking the “Connect” button will activate the
software's connection to all discovered units, allowing control and
configuration of those units. To connect to only a single unit, right
click on the unit's number and select "Connect".
3) Disconnect Button: If you want to ensure that no additional settings
are sent to the units, click the “Disconnect” button and all units will
be disconnected from the software. To disconnect a single unit, right
click on the unit's number and select "Disconnect".
Note: Disconnected units will still be shown in the layout, but the "Get",
"Set", and "Setting" functions will not be available.
4) +/− Buttons: To add dummy units (displays with no physical unit
currently connected) to a layout, click the “+” button. To completely
remove both real and dummy units from a layout, select the unit to
remove and then click the “−” button.

Bekijk gratis de handleiding van CYP DS-VWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCYP
ModelDS-VWC
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3951 MB