Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 57 van 124
3 — PROGRAMMABLE PARAMETERS
pg. 49
Return to TOC Curtis Model 1226BL – July 2024
DIGITAL/ANALOG INPUTS MENU
e Digital/Analog Inputs menu lets you enable and congure the analog/digital inputs (pins J3-4
and J3-6). e menu consists of the Digital/Analog Input 1 and Digital/Analog Input 2 menus, which
are described in the following topics.
Digital/Analog Input 1 Menu
e following table describes the Digital/Analog Input 1 parameters.
Note: To monitor the analog input voltage and the digital switch state, use the Inputs menu.
DIGITAL/ANALOG INPUTS MENU
PARAMETER
CAN INDEX
VALUES
DEFAULT
RAW VALUES
DATA SIZE DESCRIPTION
Type
[PCF]
0x332D01
0–3
0
0–3
16-bit
Species how the input will be used:
0 = Disable
1 = Lower Valve Input
2 = Lift Inhibit High Active
3 = Lift Inhibit Low Active
4 = Lift Lockout
If the value is 1 but the External Status LED Enable parameter
is on, a Parameter Mismatch fault will occur.
Digital Input Low Threshold
0x332F01
0.00–19.00V
3.00V
0–1900
16-bit
Species the analog input voltage below which the digital
switch state changes to off (low).
Digital Input High Threshold
0x333001
0.00–19.00V
5.00V
0–1900
16-bit
Species the analog input voltage above which the digital
switch state changes to on (high).
Digital/Analog Input 2 Menu
e following table describes the Digital/Analog Input 2 parameters.
Note: To monitor the analog input voltage and the digital switch state, use the Inputs menu.
DIGITAL/ANALOG INPUTS MENU
PARAMETER
CAN INDEX
VALUES
DEFAULT
RAW VALUES
DATA SIZE DESCRIPTION
Type
[PCF]
0x333101
0–3
0
0–3
16-bit
Species how the input will be used:
0 = Disable
1 = Lower Valve Input
2 = Lift Inhibit High Active
3 = Lift Inhibit Low Active
4 = Lift Lockout
The value can conict with other parameter values and cause
a Parameter Mismatch fault. The following list describes
these conicts:
• The value is non-zero but the EMR Input Type parameter
indicates an NC switch is used.
• The value is 1 but the External Status LED Enable
parameter is on.
Digital Input Low Threshold
0x333301
0.00–19.00V
3.00V
0–1900
16-bit
Species the analog input voltage below which the digital
switch state changes to off (low).
Digital Input High Threshold
0x333401
0.00–19.00V
5.00V
0–1900
16-bit
Species the analog input voltage above which the digital
switch state changes to on (high).
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
