CRUX ACPBM-77X handleiding
Handleiding
Je bekijkt pagina 10 van 12
Conguring the Trigger Outputs
You can congure the +12V trigger outputs in the OSD menu under MISC. The PINK wire (12V OUTPUT
1) is Power Out 1 for the cameras and Power Out 2 is for the Smart-Play module.
OSD Menu Menu Item Seng Descripon
Opon
Power Out 1
(PINK)
CAN +12V when the interface is on (red LED on)
ACC +12V when ignion is on
Cam
+12V when camera input is acvated
(manually or automacally)
Power Out 2
CAN Smart-Play power on.
OFF Trigger output deacvated
Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.072419
10 of 12
R
INTERFACING SOLUTIONS
ACPBM-77X
Tip: We recommend for all camera to use power out seng “Cam” and for Smart-Play the power out
seng of “CAN”.
Smart-Play Integration with Rear-View Camera Input for
E Series BMW with CCC Systems (6.5” or 8.8” Monitor) and 10-Pin LVDS Connector
Powerout sengs for Rear Aermarket Camera and Smart-Play
(Use the PINK (12V Output 1) wire to power the Rear camera)
In the OSD Menu under MISC, set “POWEROUT1” to
CAM. And set “POWEROUT2” to CAN
CAM
CAN
Bekijk gratis de handleiding van CRUX ACPBM-77X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CRUX |
| Model | ACPBM-77X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8752 MB |
