Handleiding
Je bekijkt pagina 16 van 69
10 • TS-70 and TSW-70 Series Touch Screens Security Reference Guide — Doc. 9216D
Select 802.1X Client Authentication Method
802.1X requires that the device authenticate with the server before it will be allowed on the network.
The device supports two client authentications methods: PEAPv0/EAP-MSCHAPv2 and EAP-TLS.
PEAPv0/EAP-MSCHAPv2 requires a user name and password, and EAP-TLS requires a client certificate.
To select the 802.1X client authentication method, issue the following command:
8021xmethod [password/certificate]
l
password - Uses PEAPv0/EAP-MSCHAPv2 authentication
l
certificate - Uses EAP-TLS authentication
Example: 8021xmethod password
If EAP-TLS is selected, a client certificate must be loaded into the device as explained earlier in the
802.1X instructions.
If PEAPv0/EAP-MSCHAPv2 is selected, the user name and password to use for authentication must be
entered with the following commands:
8021xusername [username]
8021xpassword [password]
Additional 802.1X Options
Additional 802.1X options may need to be configured if required by the network to which the device is
connected:
l
If the 802.1X server requires that a specific domain name be included with the 802.1X
authentication request, the domain name can be set by issuing the following command:
8021xdomain [domain_name]
l
If using PEAPv0/EAP-MSCHAPv2 authentication and the server requires the PEAP version to be
sent as part of the authentication request, the PEAP version can be enabled with the on option in
the following command:
8021xsendpeapver [on/off]
Set Password Policy
To set the password policy, issue the following command:
setpasswordrule{-all|-none}|{-length:minpasswordlength}{-mixed}{-digit}{-special}
l
-all - All password rules are applied.
l
-none - No password rules are applied.
l
-length: - Specifies the minimum password length. By default, the minimum password length is
six characters.
l
-mixed - Specifies that the password must contain a lower and upper case character.
l
-digit - Specifies that the password must contain a numeric character.
l
-special - Specifies that the password must contain a special character.
Bekijk gratis de handleiding van Crestron TSW-770, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | TSW-770 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5979 MB |