Handleiding
Je bekijkt pagina 15 van 69
Security Reference Guide — Doc. 9216D TS-70 and TSW-70 Series Touch Screens • 9
This certificate list will show the name and UID of each certificate, along with an indication of whether
or not it is being used by 802.1X.
Add Certificate to 802.1X Trust List
To add a certificate to the list of trusted certificates to be used by 802.1X, issue the following command:
8021xtrustedcas use [certificate number] [certificate name] [certificate UID]
l
certificate number - Number that identifies the specific certificate to use
l
certificate name - Name that identifies the specific certificate to use
l
certificate UID - UID that identifies the specific certificate to use
Only one identifier (number, name, or UID) is needed. These identifiers can be determined by listing the
certificates using the 8021xtrustedcas list or 8021xtrustedcas listn described above. Only the
listn command will show the certificate number.
Remove Certificate from 802.1X Trust List
To remove a certificate from the list of trusted certificates to be used by 802.1X, issue the following
command:
8021xtrustedcas dontuse [certificate number] [certificate name] [certificate UID]
l
certificate number - Number that identifies the specific certificate to remove
l
certificate name - Name that identifies the specific certificate to remove
l
certificate UID - UID that identifies the specific certificate to remove
Only one identifier (number, name, or UID) is needed. These identifiers can be determined by listing the
certificates using the 8021xtrustedcas list or 8021xtrustedcas listn described above. Only the
listn command will show the certificate number.
Removing a certificate from 802.1X does not remove the certificate from the device. The certificate will
still be present in the Root or Intermediate store.
Enable 802.1X Server Validation
Under most circumstances, validation of the 802.1X server should be enabled. By default, server
validation is disabled on this device.
To enable 802.1X server validation, issue the following command:
8021xvalidateserver [off | on]
l
off - 802.1X supplicant will not validate authentication server's certificate.
l
on - 802.1X supplicant will validate authentication server's certificate.
l
No parameter - Displays the current setting
Example: 8021xvalidateserver on
Bekijk gratis de handleiding van Crestron TSW-770, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | TSW-770 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5979 MB |