Crestron Green Light GLXX-2DIM8 handleiding

Niet gecategoriseerd

Crestron

24 pagina's

PDF beschikbaar

Handleiding

Dimming Panel Crestron Green Light Express™

Problem Solving

Troubleshooting

The following table provides corrective action for possible trouble situations. If further assistance is required, please

contact a Crestron customer service representative.

Troubleshooting

TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION

Device is not receiving

power from a Crestron

power source.

Use the provided Crestron power source.

Verify connections.

Device is not receiving

sufficient power via

Cresnet link.

Use the Crestron Power Calculator to help

calculate how much power is needed for

the system.

Module(s) does not

function.

System commissioning

not complete.

Arrange for system commissioning.

Unit cannot be taken out

of Override mode

Short (contact closure)

exists between G and OVR

terminals on any of the

OVERRIDE terminals

present at bottom of the

cabinet.

Determine the reason for the short.

Remove or remedy the short

(e.g. GLS-PLS-120/277 phase-loss sensor

may not have been installed properly, or

actual phase-loss has been detected).

Further Inquiries

If you cannot locate specific information or have questions after reviewing this guide, please take advantage of

Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876].

You can also log onto the online help section of the Crestron website (

www.crestron.com/onlinehelp) to ask

questions about Crestron products. First-time users will need to establish a user account to fully benefit from all

available features.

18 • Crestron Green Light Express™ Dimming Panel Installation Guide – DOC. 6889B

Bekijk gratis de handleiding van Crestron Green Light GLXX-2DIM8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.