Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 21 van 72
5. Earthing of the Workpiece
Where the workpiece is not bonded to earth for
electrical safety, nor connected to earth because
of it’s size and position, e.g. ship’s hull or building
steelwork, a connection bonding the workpiece
to earth may reduce emissions in some, but not
all instances. Care should be taken to prevent the
earthing of the workpiece increasing the risk of injury
to users, or damage to other electrical equipment.
Where necessary, the connection of the workpiece
to earth should be made by direct connection to
the workpiece, but in some countries where direct
connection is not permitted, the bonding should be
achieved by suitable capacitance, selected according
to national regulations.
6. Screening and Shielding
Selective screening and shielding of other cables
and equipment in the surrounding area may alleviate
problems of interference. Screening the entire
welding installation may be considered for special
applications.
OPERATING MANUAL BLUEVENOM 4R-ROVER
CIGWELD.COM.AU | 21
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
