Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 22 van 72
SECTION 5:
MIG (GMAW) WELDING
SECTION 4:
4R-ROVER WIREFEEDER OPERATION
22 | CIGWELD.COM.AU
OPERATING MANUALBLUEVENOM 4R-ROVER
Standard operating procedures apply when using these
Welding machines, i.e. connect work lead directly to workpiece
with the spring loaded clamp. The MIG wire is fed from the
spool through the feed roller system and into the MIG Gun
(consult CIGWELD or the electrode wire manufacturers
information for the correct polarity).
The welding amperage range (plate thickness pre-set) values
should be used as a guide only. Current delivered to the
arc is dependent on the Wire Feed Speed and welding arc
voltage, and as welding arc voltage varies between different
classes of MIG wire, welding current at given settings could
vary accordingly to the type of MIG wire in use. The operator
should use the plate thickness pre-set welding current values
as a guide, then nally adjust the current setting to suit the
application, by ne tuning the WFS / Amps and Volts / Trim
settings.
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
