Chief DVM27U2E handleiding
Handleiding
Je bekijkt pagina 20 van 24
DVM27U Series Installation Instructions
20
10. After the top extender upright (F or G) is installed, install top
button capture bracket and screws (removed in Step 1 of
Installing Extender Kit (DVM27UE) Section. (See Figure
24)
Figure 24
11. Continue to install extender uprights across the upper row
by repeating Steps 1-9 until row is complete.
12. Plumb adjust the upper row of uprights following steps in
Plumb Leveling Section.
Building Remaining Video Wall
1. Make sure all installed uprights are level.
2. Make sure the first row of displays is still level.
3. Install displays in a "T" or "L" formation following steps in
Displays Installation Section making sure the column is
level after installation. (See Figure 25)
4. Plumb adjust first column before proceeding to other
columns. See Plumb Leveling Section for details.
Figure 25
NOTE: Display depth can be adjusted using the mounting
buttons either using a small flathead screwdriver from
the side or a hex key (CH or CJ) from the front. (See
Figure 26)
Figure 26
5. Install #10-24 x 1" set screws (CB) into the highest H-block
in each column using 3/32" hex key (CH). (See Figure 27)
Figure 27
top button
capture brackets
10
removed
screws
removed
("T" formation shown)
1
3
depth adjust knurl
(side access)
hex key depth adjust
(front access)
M6 or M8 threaded
versions provided
Side View
small flathead
screwdriver
(CH)
5
(CB)
Bekijk gratis de handleiding van Chief DVM27U2E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chief |
| Model | DVM27U2E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3836 MB |
