Chief DVM27U2E handleiding
Handleiding
Je bekijkt pagina 19 van 24
Installation Instructions DVM27U Series
19
2. Remove socket head cap screw and loosen side screws at
bottom of extender uprights (F and G) using 1/8" hex key.
(See Figure 23)
Figure 20
3. Insert extender uprights (F and G) into T-slots on starter
uprights (A and B). (See Figure 23)
4. Tighten side screws and re-install removed socket head cap
screw though starter mount extrusion. (See Figure 23)
Figure 21
5. Level the extender uprights to ensure they are vertically
level with the starter uprights. (See Figure 22)
6. Mark mounting hole at each location. (See Figure 22)
7. Drill a 7/32" hole at the location of each mounting hole. (See
Figure 22)
Figure 22
8. Use 5/16 x 2 1/2" hex head cap screws (CA) and 5/16"
washers (CE) to secure extender uprights to wall. (See
Figure 23)
Figure 23
9. Repeat Steps 2-8 if installing more than one extender
upright.
2
remove
2
loosen
3
4
(removed set
screw)
4
tighten
(F)
(G)
5
76
(CA) x 2
8
(CE) x 2
Bekijk gratis de handleiding van Chief DVM27U2E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chief |
| Model | DVM27U2E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3836 MB |
