Chauvet Maverick Storm 3 Profile handleiding

Niet gecategoriseerd

Chauvet

43 pagina's

PDF beschikbaar

Handleiding

Maverick Storm 3 Profile User Manual Rev. 2

Setup

Ethernet Connection Diagram

Lumenradio CRMX™ Connection

In optimal conditions, the Maverick Storm 3 Profile can operate up to 300 m (900 ft) away from the

CRMX™ transmitter, The CRMX™ receiver in the Maverick Storm 3 Profile must be paired with the

CRMX™ transmitter for wireless operation.

Initial Setup

1. Turn the CRMX™ transmitter on.

2. Connect the CRMX™ transmitter to a DMX controller.

3. Place the Maverick Storm 3 Profile within 300 m from the CRMX™ transmitter.

4. Turn the Maverick Storm 3 Profile on.

Configuration

1. From the Maverick Storm 3 Profile’s control panel, go to DMX Address.

2. Select the start address, as with any other DMX compatible product.

3. Go to Settings > ControlMode.

4. Select CRMX. (The Signal Strength Indicator will show a ? in front of the bars)

5. Press the reset button on the CRMX™ transmitter. (The Signal Strength Indicator on the

Maverick Storm 3 Profile will show a ϟ in front of the bars for 3 seconds while a connection is

established.)

Product Pairing

If the Maverick Storm 3 Profile has already been paired with the CRMX™ transmitter, the Signal Strength

Indicator on top of the display will show the strength of the signal. In this case, the

Maverick Storm 3 Profile is ready to work in Wireless mode.

Pairing the Maverick Storm 3 Profile and a New CRMX™ Transmitter

1. From the Maverick Storm 3 Profile control panel, go to Settings > ControlMode.

2. Select CRMX.

3. From the CRMX™ transmitter, press <RESET>. The signal indicator on the transmitter will flash.

4. Once the transmitter has found the Maverick Storm 3 Profile, the signal indicator on the CRMX™

transmitter will illuminate solid.

5. The display screen on the Maverick Storm 3 Profile will show the strength of the signal.

CRMX™ operation can be interrupted or inhibited by people or liquid masses, including

water or snow, between the transmitter and receiver. For best results, keep the area

between the transmitter and receiver clear of any liquid masses.

Computer/

Controller

(running Art-Net™

or sACN protocol)

Switch or Router

Maverick Storm 3 Profile

To other Art-Net™ or sACN devices

Bekijk gratis de handleiding van Chauvet Maverick Storm 3 Profile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.