Chamberlain CH348C handleiding
Handleiding
Je bekijkt pagina 10 van 48
10
Installation
NOTE: If you currently have a LiftMaster, Chamberlain, Craftsman, or Raynor brand keypad
installed at your home, this new keypad may t with your current keypad’s mounting holes. You can
avoid drilling new holes if you remove your current keypad and use the same mounting locations.
Tools Required Hardware Included
1/8”
6-20 x 1”
1. Select a location to mount the keypad at a minimum height of 5 feet (1.5 m). Keep out of
the reach of children.
2. Remove the battery cover and battery to access the lower mounting hole.
3. Mark where you want the top mounting hole of the keypad to be positioned and drill a
1/8-inch (3.2mm) pilot hole.
4. Install the top screw, allowing 1/8 inch (3.2 mm) to protrude above the surface. Position
the top mounting hole of the keypad over the top screw.
5. Mark the bottom hole of the keypad (located inside the battery housing) and drill a 1/8-
inch (3.2mm) pilot hole. Install the bottom screw. Do not overtighten to avoid cracking
the plastic housing.
6. Reinstall the battery and replace the battery cover.
X2
Bekijk gratis de handleiding van Chamberlain CH348C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH348C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8546 MB |
