Chamberlain CH348C handleiding
Handleiding
Je bekijkt pagina 11 van 48
11
Keypad Features
The garage door opener activates when you press the personal identication number (PIN)
and HOME button. The keypad will ash for 15 seconds. During that time the HOME button
can be used to stop, start, or reverse the door.
If you enter the intended PIN number incorrectly, press the X button to cancel (this can
also be done after pressing the HOME button). Then enter the correct PIN number and
HOME button to activate the garage door opener.
Multiple Permanent PINs can be programmed to your garage door opener. To add
additional Permanent PINs, follow the same instructions as the rst Permanent PIN.
One Button Close
CLOSE your garage door by pressing only the HOME button instead of entering your PIN.
NOTE: This feature ONLY closes and is not available on garage door openers
manufactured prior to 2006 or an external receiver.
To deactivate one button close:
Press and hold the 0 and 9 buttons for 10 seconds. The
keypad LED’s will ash four times when the one button
close feature is deactivated.
To activate one button close:
Press and hold the 0 and 9 buttons for 10 seconds.
The keypad LED’s will ash twice when the one button
close feature is activated.
Bekijk gratis de handleiding van Chamberlain CH348C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH348C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8546 MB |
